凈化塔廠家的潤滑方法有哪些呢？

What are the lubrication methods of purification tower manufacturers?

1、 凈化塔廠家的主機傳動設備、分析機油池、提升機渦輪箱及鼓風機均用油光滑。聚丙烯尾氣吸收塔結構方式主要能夠分為單塔體和雙塔體，選用圓形塔體，用法蘭分段聯接而成。新機使用時機器的滾動部分及齒輪等跑合中，會有一定量的鐵屑顆粒落下，為不使機器過快磨損，應在開機一星期后換油一次，以后即可按光滑表的期限換油。

1. The main engine transmission equipment, analysis oil pool, hoist turbine box and blower of purification tower manufacturer all use smooth oil. The structure of polypropylene tail gas absorption tower can be divided into single tower and double tower. The round tower is selected and connected by flange section. When the new machine is used, there will be a certain amount of iron particles falling in the rolling part of the machine and gear running in. In order not to make the machine wear too fast, the oil should be changed once a week after the machine is started, and then the oil can be changed according to the period of the smooth meter.

凈化塔進程氣體的正確挑選

Correct selection of process gas in purification tower

2、每次換油時，應將舊油放干之后應用火油或菜油清洗內部，洗凈后把油放干，再注入新光滑油。同時，要注意(attention)聚丙烯吸收塔油位的凹凸，主機傳動箱已油標的中線為油位，分析(Analyse)機油池，提升機渦輪箱的油為不要高于油標的一半，鼓風機（Blower）的油面應在油針的兩刻線之間。油過少則機器光滑不足，過多則添加功率耗費，機器易過熱，還可能漏油。

2. When changing oil every time, the old oil shall be drained and then the inside shall be cleaned with fire oil or vegetable oil. After cleaning, the oil shall be drained and then injected with new smooth oil. At the same time, pay attention to the unevenness of the oil level of the polypropylene absorption tower. The central line of the oil mark of the main engine transmission box is the oil level. The oil level of the oil pool of the analysis, the oil level of the hoist turbine box should not be higher than half of the oil mark. The oil level of the blower should be between the two engraved lines of the oil needle. If the oil is too little, the machine is not smooth enough. If the oil is too much, the power consumption will be added. The machine is easy to overheat and may leak oil.

凈化塔

Purification tower

3、主機傳動設備和分析機油（oil）池的上軸(Shaft)承(bearing)是靠裝于其內部的螺旋油泵(Deep well pump)供油光滑的，它們的旋轉方向不能搞錯，轉向反了油泵不起作用（role），軸承無油。聚丙烯尾氣吸收塔吸收塔由貯液箱、塔體、進風口、噴淋層、填料層、旋流除霧層、出風錐帽、觀檢孔等組成。聚丙烯尾氣吸收塔具有凈化功率高、耐磨蝕性能***、重量輕、設備修理便利、比強度高、外觀漂亮、占地面積小、尾氣處理量***等長處。加注光滑油(Lubricating oil)前，應將油過濾，黃油(Butter)嘴要擦凈，避免加油時泥沙帶入。磨輥設備的工作條件***別惡劣，應保證其軸承光滑，并應定期清洗 填料凈化塔。

3. The oil supply of the main engine transmission equipment and the upper bearing of the analysis oil pool is smooth by the deep well pump installed in it. Their rotation direction cannot be mistaken. The oil pump does not work if the steering is reversed, and the bearing is oil-free. The absorption tower of polypropylene tail gas absorption tower is composed of liquid storage tank, tower body, air inlet, spray layer, packing layer, swirl demisting layer, air outlet cone cap, inspection hole, etc. Polypropylene tail gas absorption tower has the advantages of high purification power, good abrasion resistance, light weight, convenient equipment repair, high specific strength, beautiful appearance, small floor area and large tail gas treatment capacity. Before adding lubricating oil, filter the oil and wipe the butter nozzle to avoid sediment during oil filling. The working conditions of the roller grinding equipment are very bad, the bearing shall be smooth, and the packing purification tower shall be cleaned regularly.

凈化塔

Purification tower

對聚丙烯拋棄吸收塔定期光滑，能夠減少設備以及內部部件的磨損（零部件失效的一種基本類型），提高功率（efficiency)，添加光滑度，要使用***的光滑油，減少因油品的原因形成的設備損。

It can reduce the wear of equipment (SH è B è I) and internal components (a basic type of component failure), improve the power, add smoothness, use good smooth oil, and reduce the equipment damage caused by oil products.